![](/images/new-backgrounds/1286519/28651987x1.webp)
[ ENGLISH ]
DVD Camcorder: Basic Recording
1.Connect a power source to the DVD Camcorder.
=(A Battery Pack or a AC Power adapter)
=Insert a disc. ",page 41
2.Remove the Lens Cover.
3.Open the LCD Screen
=Set the [Mode] switch to [DISC].
=Set the [Power] switch to [_ (Camera)]. Make sure that <STBY> is displayed.
=Make sure the image you want to record appears on the LCD Screen or
=Make sure the BatteryLevel indicatesthat there is enough
remainingpower foryour expectedrecordingtime. |
| _,_ |
Viewfinder. | button. | |
4. Tostart recording_ press the [Record Start/Stop] |
| |
= <RECe> is displayed on the LCD Screen. |
|
|
The record mode, recording time_the disc type_the ...................................................................
format mode, and the title scene number are displayed on the LCD Screen.
5.Tostop recording, press the [Record Start/Stop] button again.
• <STBY> is displayed on the LCD screen after blinking.
f
REC• _ ooo20<R!,,_
30 Ilir' []
O01
=If you press the [Record Start/Stop] button to record again, a new title scene will be created. The title scene number will not appear in the STBY mode but in the REC mode.
_69Wide
This DVD Camcorder has two [Record Start/Stop] buttons. One on the rear and the other on the LCD screen'sframe.
Use either button for convenient recording.
= Playing title scenes. ",page 64
•Up to 253 title scenes can be created on
= If the power cable/batteriesare disconnected,or recordingis disabled during recording, an error messagewitl appear and the systemis switchedto the data recovery mode.
While data is being recovered, no other function is enabled After data recovery,the systemwilt be switchedto the STBY mode.