Samsung SCC-C6475P BLANK ALL ABOVE, BLANK ALL BELOW, PRYVACY ZONE MAP, SET ZONE AREA

BLANK ALL ABOVE

The available angle for setup ranges from OFF/0/-10 to -90 and the area above a set angle will be regarded as the ZONE area.

BLANK ALL BELOW

The available angle for setup ranges from OFF/0/-10 to -90 and the area below a set angle will be regarded as the ZONE area.

PRYVACY ZONE MAP

Press [ENTER] to enter the PRIVACY ZONE MAP screen from “PRIVACY ZONE MAP ON..”.

Select a privacy zone number and press [ENTER] from the PRIVACY ZONE MAP screen to enter the PRIVACY ZONE setup screen.

SET ZONE AREA

Press [ENTER] at the “SET ZONE AREA...” position to enter the PRIVACY ZONE setup screen. Control PAN/TILT/ZOOM to select 4 apexes of the PRIVACY ZONE area and the rectangular PRIVACY ZONE area will be completed.

PRIVACY ZONE SET		0		PRIVACY ZONE P/T 1
		ON...
	SET ZONE AREA					➜
SET ZOOM		...	➜
REVERSE		OFF				After P/T/Z
			Press		●
						control, press	E
			[Enter]
						[ENTER]
EXIT		QUIT
PRIVACY ZONE P/T 2					PRIVACY ZONE P/T 3
			➜

(PRIVACY ZONE SET)

STYLE	MOSAIC
BLANK ALL ABOVE	OFF
BLAK ALL BELOW	OFF
PRIVACY ZONE MAP	ON...
EXIT	QUIT

	(PRIVACY ZONE MAP)
➜	0	1	2	3	4	5
	6	7	8	9	10	11

Press [Enter]

	RET
	PRIVACY ZONE SET		0
➜		SET ZONE AREA	ON...
	SET ZOOM		...
	REVERSE		ON

Press [Enter]

●	After P/T/Z	●
	control, press
	[ENTER]

	PRIVACY ZONE P/T 4
➜
After P/T/Z	●
control, press
[ENTER]

EXITQUIT

❈For the safer privacy protection, select about 10 % more than the actual size to hide when you set up the PRIVACY ZONE area.

❈4 points of PRIVACY ZONE area are in the middle of the screen. Therefore, when the tilt is positioned at upside limit(0° or 180°), PRIVACY ZONE cannot be set in the area which is displayed above center.

❈If the points becomes X shape, it means PRIVACY ZONE cannot be set due to the size limitation.

4-18 4-19