1.Select the “Basic Settings” of Setup Wizard.
2.Select “No” in case of using Static (Fixed) IP.
3.Select the “Use Static IP Address:.
4.Network Properties
➀Enter IP Address : IP*
➁Enter Subnet Mask : Subnet Mask*
➂ Enter Gateway IP : Gateway*
5.Select “Use These DNS Servers”
6.Enter Primary DNS and Secondary DNS: DNS*
7.Select “Use Default Address”
8.Press the “Apply” button.
3. Verify the connection status.
E
Check the connection status as follows.
1.Select “Router Status”.
2.Verify WAN Port information.
Be sure to write down the Subnet Mask number to use the set