Samsung SF4100 Receiving in ANS/FAX Mode, Receiving Manually in TEL Mode, Both FAX and TEL/FAX

E-Chapter 4(US) 4/16/98 8:38 AM Page 4.9

THE FAX MACHINE

Receiving in ANS/FAX Mode

1	FAX	FINE	DARKEN
Press RCV.MODE until	ANS/FAX		PHOTO
	TEL/FAX	S. FINE	LIGHTEN
both FAX and TEL/FAX	RCV. MODE	RESOLUTION	CONTRAST
lamps light.
	MENU	ABC	DEF

2

When you get a call, the answering machine answers it. If the caller leaves a message, the answering machine stores the message.

If your machine hears a fax tone on the line, it starts to receive a fax.

To use this mode, you have to attach an answering machine to your fax machine (see page 2.5).

If you have set your machine to ANS/FAX and your answering machine is switched off, or the answering machine is not connected to your fax machine, the fax machine will automatically go into receive mode after several rings.

If you are in TEL mode (manual reception) when the answering machine is connected to your fax machine, you must switch off the answering machine, or the outgoing message from the answering machine will interrupt your phone conversation.

Receiving Manually (in TEL Mode)

1	FAX	FINE	DARKEN
Press RCV.MODE until	ANS/FAX		PHOTO
	TEL/FAX	S. FINE	LIGHTEN
both FAX and TEL/FAX	RCV. MODE	RESOLUTION	CONTRAST
lamps are off.
	MENU	ABC	DEF

2

When the telephone rings, pick up the handset and answer it.

3 COPY START/ENTER OHD/V.REQ.

If you hear a fax tone, or if the person on the other end asks you to receive a document, press START.

To adjust ringer volume, see page 2.28.

CHAPTER FOUR : THE FAX MACHINE 4.9