Setting up for NTP Synchronization | Samsung SVR-1670 specification

Chapter 7. Communication To/From the DVR

7. 3. Setting up for NTP Synchronization

Network Time Protocol (NTP) synchronizes time between devices on network. On a network, a server provides the base time. The client systems receive the time from that server for synchronization.

7. 4. Setting up Remote Control Devices

You can operate the DVR with various remote control devices.

		Figure 7.3.1 NTP submenu on the Communication Menu
	Set the options to your preferred settings to configure NTP :

	Option	Setting

	Sync With NTP	Turns NTP on or off.

	NYP Mode	Sets NTP Mode to Client, Server or All.

	NTP Server	Determines whether the NTP server is on a local network or on the Internet. This
	Location	option is only available if NTP Mode is set to Client.

	NTP Local Server	Sets the IP of the NTP server. Enter either the IP of an NTP server on the local
	NTP Local Server	network or the IP of a DVR with its NTP mode set to Server.
	IP	network or the IP of a DVR with its NTP mode set to Server.
	IP	This option is only available if the NTP Server Location is set to Local.


	Interval	Set the synchronization interval; how often you want your system to communicate
	Interval	with the server to synchronize the devices.
		with the server to synchronize the devices.

		Figure 7.4.1 Remote Control submenu on the Communication Menu

	Option	Setting

		Designation the keyboard operating all DVR functions with the controller buttons.
	Remote Keyboard	The default value is 1.
	ID	NOTE: If one keyboard is connected to several DVRs, it might conflict with other
		channels, so a different value should be set for the keyboard address.

	Remote Controller	You can control up to 16 DVRs from one remote control by creating unique IDs for
	ID	each DVR.

	Remote
	Configuration	Enable or Disable configuration to system management software.
	Setup

	Remote Relay	Enables relays to be operated from the system management software.

	Serial Port	Four serial ports are available for the DVR; two RS-232C ports and two RS-485
	Serial Port	ports.
		ports.

	PTZ	Setting up PTZ options.

Digital Video Recorder 62 User Guide

Digital Video Recorder 63 User Guide

Image 32

Samsung SVR-1670 manual Setting up for NTP Synchronization, Setting up Remote Control Devices

Contents

Digital Video Recorder SVR-1670User Guide Firmware Version Table of contents Dismantling and Cleaning During operation Compliance Statements Disposal ProceduresSVR-1670 Description Features About the SVR Package Contents Front Panel Overview Rear Panel Overview MON Remote ControlButtons on the Remote Control Hardware Installation Setting the SVR-1670’s ID for the Remote ControlUsable Range of Remote Control Reinsert the battery cover Installing the SVR-1670 in a Rack Wire Insertion and RemovalWorking with Input/Output Terminals Basic Connections to the SVR-1670 Basic Connection Diagram Connecting Cameras Connecting a Monitor Connecting Audio Connecting the Power Cable Extended Connection DiagramSensor Connections and Settings Extended Connections to the SVR-1670 O Connections And Settings Relay Connections Serial communication terminal connections Text Keyboard Internet/Intranet Connection Diagram Remote Monitoring and ControlExternal storage connections Ethernet Connections Turn on the hub or router Turn on the SVR-1670 Hard Disk Drive InstallationInstalling a Hard Disk Drive Connect the Smps switched mode power supply power cable Enabling a Hard Disk Drive Removing a Hard Disk Drive Disabling a Hard Disk DriveLift up the loose hard disk bracket Push the hard disk drive out from the bracket OSD Screen Elements Accessing the OSDWorking with the On-Screen Display Using the On-Screen Keyboard Saving Your Changes on the OSD Understanding the Menu Structure Accessing the Function MenuWorking with the Function Key Menu Quick Setup Working on the Quick Setup MenuSetting the Record Mode Manual & Event Setting the Date and Time Using the System Setup Options Using the System Setup Menu Updating FirmwareWorking with the System Log Reviewing the System Log Using the Disk Options on the System Setup Menu HDD is disabledWorking with the Disk Manager Submenu Data Working with Passwords and Permissions Setting and Reviewing PermissionsKnowing Your Password On the Password submenu, there are several columns Setting Up for Ethernet Setting up Network CommunicationChanging Passwords Setting up for xDSL Communication To/From the DVRDhcp DNS1 Registering with a Ddns Server Registering a DVR with a Dynamic IP Address Configuring the DVR for Ddns Verifying the Connection Status Setting up for NTP Synchronization Setting up Remote Control Devices Setting Up Streaming Options Setting Up IP FiltersSetting Serial Ports Setting PTZ Options Setting Up for Event Recording Working with EventsAbout Events Working on the Schedule Submenu Working with the Normal Event Source Submenu Setting Up E-Mail for Event ActionWorking with Normal Events Setting the Area for Motion Detection Setting for Text Events Emergency Recording Working with PresetsWorking with Digital I/O About Recording Performance & Capacity Scheduling and Recording VideoDefining Programs Setting Up To Record Setting Up a Schedule Audio Setup Changing Screen Display Setting Up the Camera DisplayAbout Multichannel Screen Display Setting up Auto Sequencing Setting Up the Monitor DisplayUsing Auto Sequencing Camera Commands Configuring Multi Display LayoutsCamera Commands from the Func Key Menu 10 Pan/Tilt/Zoom Commands Using Pan/Tilt Using Zoom/FocusLoading and Saving Presets Setting Auxiliary Functions Controlling Playback with Remote Control Working with Recorded VideoVarious Playback Options Searching for Recorded Video Searching by Time Searching by Calendar DateSearching by Event Select Time from the Search Menu About Copying Video Copying Video Using Web Viewer System RequirementsStarting Web Viewer Monitoring Control Relay Sensor StatusPTZ Control Playback Splitting the Screen, Changing Channels, & Screen Capture Appendix A. Specifications of the SVR-1670 Specifications of the SVR-1670Display Performance FPS SVR-1670 Recording ProgramsGeneral Samsung TechwinBosch Pelco · Pelco P · Pelco D Appendix D. Factory Default Settings MM/DD/YYYYCurrent time AGC Normal Event Source IP addr Default IP Net Mask Default NM Gateway Default GW Interval Off Server None Password0.0 Ddns NTP SPD Exit Save Do not save DVR0MIC Appendix E. Glossary FCC GUIIPS LED Dimension 445 405USB VGA Memo Digital Video Recorder 124 User Guide Digital Video Recorder 126 User Guide Sales Network