Chapter 7. Communication To/From the DVR
Setting Serial Ports
To set the serial port, first select the COM (communication port) :
∙COM1 and COM3 are fixed to
∙COM2 uses
∙COM4 uses
1.Access the Serial submenu (to the right of the COM selection).
2.For the Devise option, select a connected device.
3.Set the other selections— Baud rate, the Parity, Stop Bit and Data
Setting PTZ Options
To set PTZ options for your cameras, first specify the camera’s channel, 1 through 16.
1.Access the PTZ submenu (to the right of the PTZ channel selection).
2.Set PTZ Home to On if you want the camera to return to home if PTZ is not controlled for a specified period of time. Otherwise, set to Off.
3.If PTZ Home is set to On, set the PTZ Idle Time. This is the duration of time before which the camera returns to home. For example, if you set this to 5 seconds, PTZ returns to Home when PTZ is not controlled for more than 5 seconds.
4.Set the PTZ Port by selecting the port to which the camera channel is connected.
5.Select the Camera ID of the connected PTZ camera.
7. 5 Setting Up Streaming Options
You can set up the
•RTSP/TCP : Convenient to use in conjunction with a simple firewall that allows RTSP transmission.
•RTP/UDP : Effective when the latest video data from a camera must be transferred, even if it causes video loss.
•RTSP Standard Port (554) : Select to use the RTSP standard port (554).
Option | Setting | |
|
| |
RTSP/TCP | Select to use RTSP/TCP. | |
|
| |
RTP/UDP | Select to use RTP/UDP. | |
|
| |
RTSP Standard | Select to use the RTSP standard port. | |
Port(554) | ||
| ||
|
|
7. 6 Setting Up IP Filters
You can selectively block or allow IPs to access the
Option | Setting |
|
|
Use | Select to use the IP filter. |
|
|
Default Policy | Select to block or allow IPs using the default policy. |
|
|
IP Range | Select a range of IPs to block or allow; Check the checkbox, and then enter the IPs. |
|
|
Digital Video Recorder 64 User Guide | Digital Video Recorder 65 User Guide |
