Chargingthe Battery

Your PCS Phone comes with a rechargeable battery. You should charge the battery as soon as possible so you can begin using your phone.

Keeping track of your battery’s charge is important. If your battery level becomes too low, your phone automatically turns off and you will lose all the information you were just working on. For a quick check of your phone’s battery level, glance at the battery charge indicator located in the upper-right corner of your phone’s display screen. If the battery charge is getting too low, the battery icon blinks and the phone sounds a warning tone.

Always use a Sprint-approved desktop charger, travel charger, or vehicle power adapter to charge your battery.

Warning! Using the wrong battery charger could cause damage to your phone and void the warranty.

Using the TravelCharger

To use the travel charger provided with your phone:

1.Plug the travel charger into a wall outlet.

2.Plug the other end into the travel charger into the bottom of your phone (with the battery installed).

Charging when your phone is turned on:

The battery icon appears on the display while charging. The battery icon turns to when charging is complete.

Charging when your phone is turned off:

The battery icon appears, and the message “BATTERY CHARGING-Power Off-” is shown on the display while charging. When the battery is completely discharged, you may wait for several minutes until the message is shown on the display. The battery icon turns to , and the message changes to “CHARGING COMPLETE-Power Off-” when charging is complete.

It takes approximately 3.5 hours to fully recharge a completely rundown battery. With the Sprint-approved LiIon battery, you can recharge the battery before it becomes completely run down.

Section 2: Understanding Your PCS Phone

2A:Your PCS Phone – The Basics

14

Page 25
Image 25
Sanyo RL2000 manual Chargingthe Battery, Using the TravelCharger,  Charging when your phone is turned on