Adjusting the Phone’s Volume Settings

To adjust the Ringer or Key volume:

1.Press to access the main menu.

2.Highlight Settings and press .

3.Highlight Sounds and press .

4.Highlight Ringer/Key Vol. and press .

5.Select the item you wish to change and press .

Ringer Volume to adjust Ringer tone volume.

Start-up/Pw-offto adjust Start-up/Power-off tone volume.

Key Beep to adjust Key Beep tone volume.

6.Highlight your desired volume level and press .

Vibrate to set the Voice Call ringer volume to off with vibrate.

Ringer Off to set the Voice Call ringer volume to off. (Only appears in Ringer Volume Setting.)

Silence All to set all the ringer volumes to off. (Only appears in Ringer Volume Setting.) See “Silence All” on page 42.

To adjust Earpiece or Speaker volume:

1.Press to access the main menu.

2.Highlight Settings and press .

3.Highlight Sounds and press .

4.Highlight Receiver Volume and press .

5.Select the menu under Earpiece or Speaker and press .

When you talk in speakerphone mode, select Speaker during step 5 above.

6.Highlight your desired volume level and press .

Note: The changes made to Earpiece and Speaker volume will apply to PCS Ready Link calls.

Tip: You can adjust the ringer volume in standby mode, and adjust earpiece volume during a call by using / on the Navigation key or the Side Volume keys.

Section 2: Understanding Your PCS Phone

2B: Controlling Your Phone’s Settings

40

Page 51
Image 51
Sanyo RL2000 manual Adjusting the Phone’s Volume Settings