Sanyo RL2000 manual Setting Up Screen Call, Activating Screen Call

Setting Up Screen Call

This feature enables you to answer incoming calls by using recorded announcements, either one that came pre-recorded on your phone or one that you record. You can also record the caller’s message into the Voice Memo list. To listen to the message, see “Reviewing Voice Memos” on page 114.

Activating Screen Call

To start Screen Call when you have incoming calls:

1.Press to display the options.

2.Highlight Screen Call and press . To set Auto Screen Call:

1.Press to access the main menu.

2.Highlight VoiceService and press .

3.Highlight Screen Call and press .

4.Highlight Auto and press .

5.Highlight On and press .

If you want to change the answer time, enter your desired number (from 1 to 16 seconds) by using numeric keys or / on the Navigation key.

6.Press or OK (left softkey) (the icon is displayed on the standby display).

Tip: If a new caller’s message is waiting, appears on the display. The memos recorded while activating “Screen Call” are shown with “√” or “!” icon in the list (“√”: once played, “!”: not played yet).

Tip: While the caller is recording; pressing stops recording and

disconnects the call; pressing answers a call.

Section 2: Understanding Your PCS Phone

2I: Using Your Phone’s Voice Services 116