Sanyo RL2000 manual Receiving a PCS Ready Link Call 1-to-1 Call, Redialing a PCS Ready Link Call

Receiving a PCS Ready Link Call (1-to-1 Call)

1.When you receive a PCS Ready Link call from a contact,

“ Call,” the contact’s name and the PCS Ready Link number appear on the display.

2.Press and hold to get the floor.

You can get the floor before hearing a voice if nobody has the floor.

3.Speak after the beep (keep pressing down while you are speaking). After speaking, release the key to listen.

4.To disconnect the call, press .

Receiving a PCS Ready Link Call (Group Call)

1.When you receive a PCS Ready Link call from one of the group members, “Group Call,” the name, and the PCS Ready Link number appear on the display.

2.Press and hold to get the floor (if nobody already has the floor).

3.Speak after the beep (keep pressing down while you are speaking). After speaking, release the key to listen.

4.To disconnect the call, press .

Redialing a PCS Ready Link Call

You can redial to the last PCS Ready Link call that you dialed or received (whichever was more recent).

To redial a PCS Ready Link call:

1.From the PCS Ready Link List, highlight Redial, then press and

hold to redial the last PCS Ready Link call and get the floor.

2.Speak after the beep (keep pressing down while you are speaking). After speaking, release the key to listen.

3.When you are finished, press .

Note: You can change the volume and the speaker setting while a PCS Ready

Link call is activated. Volume: Adjust the voice volume by using the Side Volume keys or / on the Navigation key except when you are pressing and holding . This doesn’t affect tone and beep volume. Speaker: Switch the speaker

On or Off by pressing .

Section 2: Understanding Your PCS Phone

2A:Your PCS Phone – The Basics 29