
End-of-Call Options
To display the following options, press ![]()
![]()
![]()
within 10 seconds after disconnecting a call.
To select an option, highlight it and press
.
Call Again to dial the phone number.
Call:Speaker On to dial the phone number in speakerphone mode.
Save Phone# to save the phone number in your internal Phone Book. Alternate appears when the number is already in your internal Phone Book. (See “Saving a Phone Number” on this page.)
Note: The
Saving a Phone Number
Your PCS Phone can store a total of 500 phone numbers in 300 internal Phone Book entries. Each Phone Book entry can store up to seven phone numbers and the entry’s name can contain 16 characters. Your phone automatically sorts the internal Phone Book entries alphabetically.
To save a number from standby mode:
1.Enter a phone number.
2.Press
.
3.Highlight Save Phone# and press
.
4.Select a label by highlighting Home, Work, Mobile, Pager, Data,
Fax, or No Label and press
.
5.Enter a Name and press
.
If you have already stored entries in the Phone Book, you are prompted to select the following entry modes:
New Name to enter a name directly.
From Phone Book to select a name from Phone Book entry list.
6.Press Save (left softkey).
After you have saved the number, the new internal Phone Book entry is displayed. (See “Internal Phone Book Entry Options” on page 77.)
Note: To save the number without name, press
, highlight Yes, and press
during step 5 above.
Section 2: Understanding Your PCS Phone
2A:Your PCS Phone – The Basics | 22 |