Sanyo RL2000 manual To turn Call Guard on or off, To place Roaming Calls with Call Guard on

Controlling Roaming Charges Using Call Guard

In addition to the roaming icon, Call Guard alerts you when roaming charges apply. This feature makes it easy to manage your roaming charges by reminding you when you make or receive roaming calls. It also requires you to take an additional step before placing or answering a roaming call. This additional step is not required when you make or receive calls while on the Sprint Nationwide PCS Network.

To turn Call Guard on or off:

1.Press to access the main menu.

2.Highlight Settings and press .

3.Highlight Roaming and press .

4.Highlight Call Guard and press .

5.Select On or Off and press .

Note: Voice Dialing and Speed Dialing are not available when you are roaming with Call Guard enabled.

To place Roaming Calls with Call Guard on:

Press any key to erase the pop-up message, then press ,

highlight Roam Call or Roam:Speaker On, and press .

– or –

1.From standby mode, dial 1 + area code + the seven-digit number. (You can also initiate a call from the internal Phone Book, Call History, or Messaging.)

2.Press or (or press and highlight Call or

Call:Speaker On) and press .

3.Press to proceed while the pop-up message is displayed.

To answer incoming Roaming Calls with Call Guard on:

Press , highlight Answer or Answer:Speaker, and press .

– or –

1.Press or .

2.Press to proceed while the pop-up message is displayed.

Remember, if the Call Guard feature is set to On, you need to take extra steps to make and receive roaming calls even if you have selected the Analog setting (see previous page).

Section 2: Understanding Your PCS Phone

2D: Controlling Your Roaming Experience 67