English
5-4. How to Connect Wiring to the Terminal
WARNING | Loose wiring may cause the | |
terminal to overheat or result | ||
| ||
| ||
| in unit malfunction. A fire | |
| hazard may also exist. There- | |
| fore, be sure all wiring is | |
| tightly connected. |
When connecting each power wire to the corresponding terminal, follow the instructions “How to connect wiring to the terminal” and fasten the wire securely tight with the fixing screw of the terminal plate.
How to connect wiring to the terminal
a) For Indoor Unit
| STRIP | 7 mm (ACTUAL | |
|
| SIZE) | |
| SIZE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fig. 26
(1)Cut the wire end with a cutting pliers, then strip the insulation to expose the wire about 7 mm. See the label (Fig. 26) near the terminal plate.
(2)Using a screwdriver, loosen the terminal screw on the terminal plate.
(3)Insert the wire and tighten the terminal screw com- pletely using a screwdriver.
b) For Outdoor Unit
■For solid core wiring (or F-cable)
(1) Cut the wire end with a cutting pliers, then strip the |
insulation to expose the solid wire about 25 mm. |
(Fig. 27) |
25 mm
10 mm
Solid wire
Insulation
Fig. 27
Stranded wire
Loop
Ring connector
(2) | Using a screwdriver, remove the terminal screw(s) |
| on the terminal plate. |
(3) | Using the pliers, bend the solid wire to form a loop |
| suitable for the terminal screw. |
(4) | Shape the loop wire properly, place it on the termi- |
| nal plate and fix it securely with the removed termi- |
| nal screw using a screwdriver. |
■For stranded wiring
(1)Cut the wire end with a cutting pliers, then strip the insulation to expose the stranded wiring about
10 mm and tightly twist the wire ends. (Figs. 28 and 29)
(2)Using a screwdriver, remove the terminal screw(s) on the terminal plate.
(3)Using a ring connector fastener or pliers, securely clamp each stripped wire end with a ring connector. (Fig. 28)
(4)Place the ring connector wire, and replace and tighten the removed terminal screw using a screw- driver. (Fig. 30)
Fig. 28
Twist wire ends
| Fig. 29 |
|
Special | Screw |
|
washer |
| |
|
| Screw and |
| Ring connector | special washer |
|
| |
Wire | Terminal plate | Ring |
| connector | |
|
| |
| Wire |
|
Fig. 30
16