Sanyo SAP-CMRV1926EH Español Français, Deutsch Italiano Português EÏÏËÓÈο, For Outdoor Unit

For Outdoor Unit

INSTALLATION INSTRUCTIONS

– Inverter Multi Split System Air Conditioner – COOL/DRY/HEAT Model

This air conditioner uses the new refrigerant R410A.

Contents

Page

IMPORTANT!

Model Combinations

Combine indoor and outdoor units only as listed below.

English

Please Read Before Starting			2
1.	GENERAL		3
	1-1. Tools Required for Installation (not supplied)
	1-2. Accessories Supplied with Unit
	1-3. Optional Copper Tubing Kit
	1-4. Type of Copper Tube and Insulation Material
	1-5. Additional Materials Required for Installation
2.	INSTALLATION SITE SELECTION		4
	2-1.	Indoor Unit
	2-2. Connecting Indoor Units
	2-3.	Outdoor Unit
	2-4.	Outer Dimensions of Outdoor Unit
	2-5.	Diagram of Outdoor Unit Installation

Indoor Unit

SAP-KMRV74EH SAP-KMRV94EH SAP-KMRV124EH

SAP-KMRV76EH SAP-KMRV96EH SAP-KMRV126EH

SAP-KRV96EHDS SAP-KRV126EHDS

SAP-KRV184EH SAP-KRV244EH

SAP-KRV186EH SAP-KRV246EH

Outdoor Unit

SAP-CMRV1926EH

SAP-CMRV1936EH

SAP-CMRV2446EH

SAP-CMRV3146EH

Español Français

3.	INSTALLATION PROCESS	13
	3-1. Embedding the Tubing and Wiring
	3-2. Drain Cap and Drain Elbow
	3-3. Use of the Flaring Method
	3-4. Flaring Procedure with a Flare Tool
	3-5. Caution Before Connecting Tubes Tightly
	3-6. Tubing Connections
	3-7. Insulation of Refrigerant Tubing
	3-8. Taping the Tubes
	3-9. Finishing the Installation
4.	AIR PURGING	16
	■ Air Purging with a Vacuum Pump (for Test Run)
	■ Pump Down
5.	WIRING INSTRUCTIONS	19
	5-1. General Precautions on Wiring
	5-2. Recommended Wire Length and Diameter
	5-3. Wiring System Diagram
	5-4. How to Connect Wiring to the Terminal
	5-5. Wiring Instructions for the Outdoor Unit
6.	TEST RUN	23

7.CONNECTING A HOME AUTOMATION

	DEVICE	24
8.	INSTALLATION CHECK SHEET	24
9.	ELECTRIC WIRING DIAGRAM	24

85264190442002 © SANYO 2008

Combine indoor and outdoor units only as listed in the combination tables for 2-room, 3-room or

4-room outdoor unit as shown in its respective manual.

Power Source:

50 Hz, single-phase, 220 – 240 VAC

Be sure to read the yellow instruction sheet attached to the outdoor unit for models using the new refrigerant R410A.

Combination example

Indoor unit B

Indoor unit A

Indoor unit C

Outdoor unit

Indoor unit D

NOTE

The illustrations are based on the typical appearance of a standard model. Consequently, the shape may differ from that of the air conditioner that you are installing.

SANYO Electric Co., Ltd.

Osaka, Japan

Deutsch Italiano Português EÏÏËÓÈο