2-4. Outer Dimensions of Outdoor Unit
608 |
| 85 |
|
|
| A | 285 | 310 | 336 |
|
|
|
|
A |
|
|
790 | 70 |
|
| 569 | 70 |
| 15 | 158 |
|
| Service valve on |
|
|
| narrow tube side |
|
|
| (Outer diameter ø6.35) | English |
| Service valve on | ||
| wide tube side | ||
| (Outer diameter ø9.52) | ||
| 70 |
| |
| 122 |
|
|
46 | 142 | unit: mm |
|
Fig. 6a
2-5. Diagram of Outdoor Unit Installation
Never install only a single indoor unit.
Be sure to connect indoor and outdoor units only in combinations that are listed in the catalog or in the combination table that was provided with the outdoor unit. (Use caution. Connecting any other model may result in operation failure and malfunction.)
The dimensions indicated by in the figure below are spaces that are required in order to maintain performance. Install in a location where the dimensions indicated by are ensured, and where 2 or more faces of the unit are unobstructed. In principle, the top direction should be unobstructed.
Over |
| Over | 10cm |
5cm |
| ||
| Power breaker | ||
|
| ||
|
|
|
Ensure 15cm of space if a drain hose is to be used.
| 40cm | B |
Over | A | |
|
|
Base (not provided)
(concrete or similar material)
Fasten with anchor bolts (not provided)
(3/8" or M10, 4 locations)
Indoor unit B
Indoor unit A
Service space
Over | 25cm |
|
Access panel C
Ground wire (not provided)
Fig. 6b
7