Sanyo SAP-CMRV1426EH-F, SAP-CMRV1926EH manual

English

1-5. Additional Materials Required for Installation

1.Refrigeration (armored) tape

2.Insulated staples or clamps for connecting wire (See local codes)

3.Putty

4.Refrigeration lubricant

5.Clamps or saddles to secure refrigerant tubing

2. Installation Site Selection

Indoor unit

2-1. Indoor Unit

WARNING

AVOID:

●direct sunlight.

To prevent abnormal heat generation and the possibility of fire, do not place obstacles, enclosures and grilles in front of or surrounding the air conditioner in a way that may block air flow.

Drain hose

Outside drainage

Fig. 1

●nearby heat sources that may affect performance of the unit.

●areas where leakage of flammable gas may be expected.

●placing or allowing any obstructions near the Air Conditioner inlet or outlet.

●installing in rooms that contain instant-on (rapid-start) fluorescent lamps. (These may prevent the Air Conditioner from receiving signals.)

●places where large amounts of oil mist exist.

●installing in locations where there are devices that generate high-frequency emissions.

DO:

● select an appropriate position from which every corner of

the room can be uniformly cooled. (High on a wall is best.)

● select a location that will hold the weight of the unit.

● select a location where tubing and drain hose have the

shortest run to the outside. (Fig. 1)

	5 cm	15 cm min.		5 cm
	5 cm			5 cm
	min.			min.
		Front View
		Fig. 2
	INDOOR	Tubing length (L1)
	UNIT (1)		INDOOR
			INDOOR
			UNIT (2)
	Elevation	OUTDOOR	L2
	difference (H1)	OUTDOOR			H2
		UNIT
			L3
H4	INDOOR	L4	INDOOR		H3
	UNIT (4)	L4	UNIT (3)

Fig. 3a

● allow room for operation and maintenance as well as

unrestricted air flow around the unit. (Fig. 2)

● install the unit within the maximum elevation difference

(H1, H2, H3, H4) above or below the outdoor unit and

within a total tubing length (L1+L2, L1+L2+L3,

L1+L2+L3+L4) from the outdoor unit as detailed in

Table 3 and Fig. 3a.

CAUTION

For stable operation of the air conditioner, do not install wall-mounted type indoor units less than 1.5 m from floor level.

Indoor unit

Minimum height from floor level 1.5 m

Wall

Floor level

Fig. 3b

SAP-CMRV1926EH, SAP-CMRV1426EH-F specifications

The Sanyo SAP-CMRV1926EH and SAP-CMRV1426EH-F stand out in the realm of advanced climate control solutions. As part of Sanyo's renowned lineup of air conditioning systems, these models are designed to offer superior performance, energy efficiency, and enhanced comfort, catering to both residential and commercial use.

One of the main features of the SAP-CMRV1926EH is its robust cooling and heating capacity, making it an ideal choice for larger spaces or those requiring rapid temperature adjustments. The model boasts a cooling capacity of up to 19kW, while the SAP-CMRV1426EH-F offers a more compact 14kW, making it suitable for smaller environments without compromising performance. This flexibility allows users to select a model that best fits their specific needs.

Both models incorporate advanced inverter technology, which significantly enhances their energy efficiency. By adjusting the compressor speed according to the ambient temperature, inverter systems minimize power consumption while maintaining a stable indoor climate. This not only reduces electricity bills but also contributes to a lower environmental impact, aligning with modern sustainability standards.

In terms of comfort, the Sanyo SAP-CMRV1926EH and SAP-CMRV1426EH-F feature sophisticated air distribution systems. They ensure even airflow throughout the area, eliminating hotspots and providing consistent temperatures. Additionally, the models are equipped with multi-split capabilities, allowing for multiple indoor units to be connected to a single outdoor unit. This versatility is particularly beneficial for larger buildings or homes with varied room requirements.

Both models also prioritize user convenience with sophisticated control options. They offer wireless remote controls as well as compatibility with smart home systems, enabling users to program settings and monitor indoor conditions from their smartphones or tablets. This modern approach enhances user engagement and allows for greater customization of the climate control experience.

Noise levels are another consideration in the design of the SAP-CMRV1926EH and SAP-CMRV1426EH-F. These units operate quietly, ensuring that they do not disrupt the tranquility of living or working spaces. Their low-noise operation is a testament to Sanyo's commitment to creating comfortable environments without compromising on performance.

In summary, the Sanyo SAP-CMRV1926EH and SAP-CMRV1426EH-F models are distinguished by their impressive cooling and heating capacities, energy-efficient inverter technology, advanced air distribution, user-friendly controls, and quiet operation. These features make them an excellent choice for anyone seeking reliable and effective climate control solutions.

Sanyo SAP-CMRV1426EH-F, SAP-CMRV1926EH H1, H2, H3, H4 above or below the outdoor unit

Models: SAP-CMRV1926EH SAP-CMRV1426EH-F