Seagate DL585 manual About this guide, Audience assumptions, Technician notes

1 About this guide

This maintenance and service guide can be used for reference when servicing the HP ProLiant DL585 Server.

WARNING! To reduce the risk of personal injury from electric shock and hazardous energy levels, only authorized service technicians should attempt to repair this equipment. Improper repairs can create conditions that are hazardous.

Audience assumptions

This guide is for service technicians. HP assumes you are qualified in the servicing of computer equipment and trained in recognizing hazard in products with hazardous energy levels and are familiar with weight and stability precautions for rack installations.

Technician notes

WARNING! Only authorized technicians trained by HP should attempt to repair this equipment. All troubleshooting and repair procedures are detailed to allow only subassembly/module-level repair. Because of the complexity of the individual boards and subassemblies, no one should attempt to make repairs at the component level or to make modifications to any printed wiring board. Improper repairs can create a safety hazard.

WARNING! To reduce the risk of personal injury from electric shock and hazardous energy levels, do not exceed the level of repairs specified in these procedures. Because of the complexity of the individual boards and subassemblies, do not attempt to make repairs at the component level or to make modifications to any printed wiring board. Improper repairs can create conditions that are hazardous.

WARNING! To reduce the risk of electric shock or damage to the equipment:

•Disconnect power from the system by unplugging all power cords from the power supplies.

•Do not disable the power cord grounding plug. The grounding plug is an important safety feature.

•Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.

CAUTION: To properly ventilate the system, you must provide at least 7.6 cm (3.0 in) of clearance at the front and back of the server.

CAUTION: The computer is designed to be electrically grounded (earthed). To ensure proper operation, plug the AC power cord into a properly grounded AC outlet only.

NOTE: Any indications of component replacement or printed wiring board modifications may void any warranty.

Where to go for additional help

In addition to this guide, the following information sources are available:

•User documentation

•Service Quick Reference Guide

•Service training guides

•Service advisories and bulletins

•QuickFind information services

•HP Systems Insight Manager (HP SIM) software

About this guide 5