16.Remove the seven cable clips:
a.Lift to disengage the cable clip.
b.Slide the clip forward, and lift it off the chassis. Figure 47 Removing the cable clips
17.Use the Torx T-15 tool or screwdriver to remove the eight screws that secure the power supply connectors to the chassis bottom .
18.Remove the cords from the connectors .
19.Remove the connectors from the server .
Figure 48 Removing the power supply connectors
20.Use the Torx T-15 tool or a screwdriver to remove the four screws that secure the AC filter cable assembly to the rear chassis wall.
Removal and replacement procedures 51
