BBWCE
Figure 61 BBWCE LEDs
NOTE: The battery takes 24 hours to charge for the first time.
Table 21 BBWCE LEDs
Server status | LED color | LED status | Battery module status |
|
|
|
|
Server is on and has normal | Green (2) | On | Fast charging |
run time. |
|
|
|
|
|
|
|
— | Green (2) | Off | Trickle charging |
|
|
|
|
— | Amber (1) | On | Short in the connection of one |
|
|
| or more of the four button |
|
|
| cells within the battery module |
|
|
|
|
— | Amber (1) | Blinking | Open in the circuit between |
|
|
| the positive and negative |
|
|
| terminals of the battery |
|
|
| module |
|
|
|
|
— | Amber (1) | Off | Battery module status is |
|
|
| normal |
|
|
|
|
Server is on and is in the first | Amber (1) or green (2) | On | Temporary |
30 seconds after power up. |
|
| is lost because cable being |
|
|
| detached |
|
|
|
|
Server is off and is in data | Amber (1) | Blinking every 15 seconds | Backing up user data held in |
retention mode. |
|
| write cache. |
CAUTION: After the server is powered down, wait 15 seconds and then check the LED illumination pattern before unplugging the cable from the battery module. The LEDs are not visible with the rear access panel on.
If the amber LED blinks after 15 seconds, do not remove the cable from the battery module. This module is backing up data, and data is lost if the cable is detached.
When the server is on, review the POST message before plugging or unplugging the cable from the module.
Server component identification 67
