Sharp AR-650 To change theAutomatic Energy Save time, To change the Automatic Shutoff time

6. CHANGING AUTOMATIC ENERGY SAVE TIME/ AUTOMATIC SHUTOFF TIME

1

2

Press the PROGRAM key to enter the Program menu.

Press the Next key on the PROGRAM panel to display the panel on the right.

To change theAutomatic Energy Save time

1

2

Press the ENERGY SAVE key on the panel

shown at the top.

. The display on the right appears.

Select the desired number on the panel.

To change the Automatic Shutoff time

1

2

Press the AUTO SHUTOFF key on the

panel shown at the top.

. The panel on the right appears.

Select the desired number on the panel.

To exit from the Automatic Energy Save time

. Press the ENERGY SAVE key or the START key.

. The copier starts warming up, then it becomes ready after a short while.

. Using the Auto Job Start mode is convenient. See page 17.

To exit from the Automatic Shutoff time

1 Turn the power switch ON.

. The copier starts warming up, then the message READY appears after approx. 7 minutes. See page 16.

. Using the Auto Job Start mode is convenient. See page 17.

104