5. REDUCTION AND ENLARGEMENT COPYING (Cont.)

When Placing the Original on the Glass

. After lifting the automatic document feeder, place the original on the glass face down with the bottom toward you and the left side centered against the original scale.

. Close the automatic document feeder slowly after the original size has been detected.

5

6

Select the desired exposure and copy quantity.

Press the START key.

Note: If there are sheets of paper set on the sheet bypass, you must press the COPY-SIZE key corresponding to the size of the sheets. (See page 50.)

Using the Zoom Keys

1

2

3

Press the cassette of the desired paper size on the display.

Press the ZOOM ORG.COPY key.

Select the desired reproduction ratio using the ZOOM keys.

. For enlargement, use the UP key. For reduction, use the Down key.

. Each time you press either ZOOM key, the reproduction ratio changes by 1%. Holding down the key changes the reproduction ratio continuously.

. Pressing the 400% key or the 25% key causes 400% or 25% to be immediately displayed.

. Pressing the 100% key returns the copier to actual-size copying.

32

Page 36
Image 36
Sharp AR-650 operation manual Using the Zoom Keys