Sharp AR-650 Using Automatic Magnification Selection, Press the desired COPY-SIZE key

5. REDUCTION AND ENLARGEMENT COPYING

There are three methods available for enlargement and reduction copying.

. Using Automatic Magnification Selection (AMS):

After selecting the AMS mode and the copy size, when you place an original on the glass or when an original is fed from the automatic document feeder, the copier automatically detects the size of the original, and calculates the appropriate reproduction ratio.

. Specifying the original and copy sizes:

When you specify both the original and copy sizes, the copier automatically calculates the appropriate reproduction ratio.

. Using the ZOOM keys:

The ZOOM keys Down and Up allow selection of the desired reproduction ratio in increments of 1%.

HOW TO MAKE COPIES

1

2

3

4

Using Automatic Magnification Selection

Press the ZOOM ORG.→ COPY key.

Press the AMS key.

. The AMS key gets highlighted.

Press the desired COPY-SIZE key.

. The selected COPY-SIZE key gets highlighted.

Place the original(s) on the original feed tray or on the glass.

When Using the Automatic Document Feeder

. After aligning the edges of the originals, set them face up on the original feed tray and align the slides to the edges of the originals.

. The number of originals you can load at a time is shown below.

Letter, Letter-R, Statement-R : 60 Ledger : 30 Legal : 35

Note: Remove any paper clips or staples from originals before placing them on the original feed tray.

Slides 29