14. INTERRUPT COPYING

The Interrupt Copy is a convenient feature that allows the user to pause a job that is currently being done. This mode allows for a single copy to be made from either the bypass guide or nominated cassette. Multiple copies are possible by pressing the START key once for every copy requierd.

1 Press the INTERRUPT key. The following message appears:

Job interrupted job 1 saved

Note: Interrupt copying is not available during scanning of the originals. Press the INTERRUPT key when the scanning has completed.

2 Replace the original with a new original.

. After lifting the automatic document feeder, place the original on the glass face down with the bottom toward you and the left side centered against the original scale.

. Close the automatic document feeder slowly after the original size has been detected.

Note: During the interruption, the automatic document feeder and automatic duplexer are inoperable.

3

Select the desired copy size, exposure and

reproduction ratio.

4

Press the START key.

. You can make multiple copies by pressing the

 

START key once for each copy desired.

5

After interrupt copying is finished, press

the INTERRUPT key again.

. This message will appear:

READY to resume job 1

HELP

COPY

ENERGY SAVER

TIMER

PRINTER/NETWORK

INTERRUPT

52

Page 56
Image 56
Sharp AR-650 Interrupt Copying, Replace the original with a new original, Reproduction ratio, Interrupt key again