Sharp AR-650 operation manual Select the exposure, Key in the desired copy quantity

When Placing the Original on the Glass

. After lifting the automatic document feeder, place the original on the glass face down with the bottom toward you and the left side centered against the original scale.

. The sensor unit immediately detects the size of the original, and selects the appropriate paper size.

. Close the automatic document feeder slowly

after the original size has been detected.
. Sometimes the following message appears:
Change direction of original	,
change the direction of the original on the
glass.
If the following message appears:
Set correct cassette	,
install the correct-sized cassette.

HOW TO MAKE COPIES

3 Select the exposure.

. The AUTO-EXPOSURE mode is set as the default mode, and provides the optimum exposure automatically according to the darkness of the original.

. If you want to select the desired exposure, see page 46.

4 Key in the desired copy quantity.

. You can key in up to 999.

. There is no need for this when making only one copy.

. When an incorrect quantity is set, press the CLEAR key and key in the correct number.

ALL CLEAR

1 2 3

4 5 6

7 8 9

0C

CLEAR

STOP

START

25