Sharp AR-650 REDUCTION AND ENLARGEMENT COPYING Cont, When Placing the Original on the Glass

5. REDUCTION AND ENLARGEMENT COPYING (Cont.)

When Placing the Original on the Glass

. After lifting the automatic document feeder, place the original on the glass face down with the bottom toward you and the left side centered against the original scale.

. Close the automatic document feeder slowly.

. The sensor unit immediately detects the size of the original, selects the paper size matched to the original, and calculates the reproduction ratio based on the detected original size and the selected copy size. The reproduction ratio is then displayed.

. If the following message appears:
Change direction of original	,
change the direction of the original on the
glass.
. If the following message appears:
Use reduction cassette	,

install the correct-sized cassette, and set the original on the glass again.

5 Select the desired exposure and copy quantity.

6 Press the START key.

. Reduced or enlarged copies of the selected size will be made.

Note: The copier may not be able to detect the following types of originals in the AMS mode:

. Transparent originals such as OHP film

. Originals with black areas

ALL CLEAR

1 2 3

4 5 6

7 8 9

0 C

CLEAR

STOP

START

30