4

Press the

 

SET

key.

. The set margin default is 7 mm.

. To change the margin:

 

Press the

0mm

or

30mm

key to select

 

the desired margin setting, and press the

SET

 

key.

 

 

 

 

 

 

 

. When combining image shifting with duplex

 

copying, select FRONT for the front side and

 

BACK for the back side of the copy.

5

Place the originals on the original feed tray

or on the glass.

. After aligning the edges of the originals, set

 

them face up on the original feed tray and

 

align the slides to the edges of the originals.

 

. Place the original on the glass face down with

 

the bottom toward you and the left side

 

centered against the original scale.

6 Select the desired copy size, exposure, reproduction ratio and copy quantity.

7 Press the START key.

Tip: Margins can be created also in the bypass copy mode. To do this, set the paper in the sheet bypass (see page 50), and press the desired COPY-SIZE key to select the paper size. If LETTER-R paper is used, press the corresponding COPY-SIZE key twice.

USING THE EDITING FUNCTIONS

57

Page 61
Image 61
Sharp AR-650 operation manual Set, Or on the glass