Sharp AR-650 operation manual 126, Place the original and press the Start

7. MAGAZINE SORT & SADDLE STITCHING MODE (Cont.)

	When Placing the Original on the Glass
1	Perform steps 2 through 5 of the procedure
	Feeder".for "When Using the Automatic Document
2	Place the original and press the START
	.key.Place the original on the glass face down with
	the bottom toward you and the left side
	centered against the original scale.
	. Place the first page of the originals first.
	When SADDLE STITCH is selected, if referring
	to the illustration on page 124 for example,
	set them in the order of pages 12-1, 2-11, 10-
	3, 4-9, 8-5, then 6-7.
	. Refer to step 6 on page 37 for direction of
	originals placed.
3	When the first original has finished being
	scanned, press the	YES	key, set the next
	original and press the START key.

. You can start scanning by pressing the START key (you do not need to press the YES key).

4

5

6

For the next and subsequent originals, repeat step 3.

When the last original has finished being scanned, press the FINISHED key.

. Printing starts.

Copies exit onto the trays.

. When the finisher trays reach maximum capacity, the following message appears:

Finisher full: Remove paper

Remove the copies from the trays and press the START key to continue.

. To cancel copying, press the STOP key to interrupt the copy run, then press the MEMORY CLEAR key.

126