Sharp AR-650 Bypass Copying By Specifying The Copy Size, Select the desired copy size

13. BYPASS COPYING BY SPECIFYING THE COPY SIZE

In bypass copying by specifying the copy size, you can select the following copying modes:

. Duplex copying	. Document storage	. Image shift	. Sort copying
. Annotation	. Edge erase	. Page number`	. Dual-page copying

1 Place sheets of copy paper on the sheet bypass.

The following message appears:

Ready for bypass feeding

. Paper of size Ledger to Statement-R can be used.

. Place the sheets on the bypass guide and align the slides to the paper size.

. You can set up to 100 sheets of paper (17 to 22 lb).

. Thick sheets of paper (23 to 32 lb), OHP films, sticker labels should be inserted one sheet at a time.

. For setting Ledger, Legal or Letter-R sized paper, pull out the paper holder.

2

3

Select the desired copy size.

. Press the desired COPY-SIZE key.

. If Letter-R paper is used, press the COPY- SIZE key twice. The paper size in the upper right corner of the display panel will change.

Select the desired, image shift mode, edge erase mode, dual-page copying, sort copying, annotation, page number, document storage or duplex copying mode as well as the exposure and the reproduction ratio.

50