Sharp FO-4450 operation manual 111

Optional Settings

Setting 18: RETRANSMISSION INTERVAL

You can select the number of minutes the fax waits between each memory

retransmission attempt. Enter	0 1 for 1 minute, 0 2 for 2 minutes,
etc., up to a maximum of 15 minutes. If you do not want the fax to wait
between attempts, enter 0	0 .

♦Initial setting: 02

Setting 19: POWER SAVE MODE

To conserve power, you can have the laser printer heater in your fax machine turn off when not in use. When this is done, the heater will turn on automatically when you receive a document (there will be a slight delay before printing while the heater warms up) and turn off when printing is completed.

Press 1 to turn on Power Save mode, or 2 to turn it off.

♦Initial setting: 1

Setting 20: ANTI-JUNK FAX

Press 1	to block reception from fax numbers entered in the Anti Junk Fax
List. Press	2 to allow reception from all numbers.

♦Initial setting: 2

Setting 21: ALARM VOLUME

This sets the volume of the beep sound that alerts you to error conditions and

informs you that operations have been completed. Press 1 for HIGH, 2 for LOW, or 3 for OFF.

♦Initial setting: 2

Setting 22: DIAL MODE

This sets the dial mode. Press 1 if you are on a touch-tone line, or 2 if

you are on a pulse dial (rotary) line.

♦Initial setting: 1

6. Optional Settings

111