Sharp FO-4450 operation manual Timer Operations, Initial procedure

Timer Operations

Timer Operations

The Timer function allows you to store a job to be performed automatically at a specified time. Up to 59 timer jobs can be stored at any one time, and the time of each can be specified up to a week in advance.

You can use this function to take advantage of lower off-peak rates without having to be there when the operation is performed.

DOCUMENT
Note: M/?	cannot be used for a timer transmission.

Initial procedure

To store a timer job, first perform the following procedure. After you have completed this procedure, go to the procedure for the specific job you want to store (see the following pages).

1	Press	TIMER	. (Flip up the Rapid Key	Display:
		X/>
					TIMER MODE
	overlay if it is down.)
					1=SET, 2=CLEAR

2Press 1 to select SET.

3Enter a number as follows to select the desired operation (or scroll to

the desired operation with	or	and press	START/	).
			ENTER

1Transmission (SEND MODE)

2Confidential transmission

3Polling

4Serial Polling

5Broadcasting

4Enter a two-digit number for the hour (“01” to “12”) and a two-digit number for the minute (“00” to “59”).

5. Special Functions

77