Chapter 14: Specifications

14-3 JW-50FL

[1] General specifications

Item

Specifications

 

 

Host PC

Install in optional slots on the JW50/70H/100H (max. 5 units) *1

 

 

Storage temperature

-20 to +70˚ C

 

 

Ambient operating

0 to +55˚ C

temperature

 

 

 

Ambient humidity

35 to 90% RH (without condensing)

 

 

Vibration resistance

Equivalent to JIS C 0911: Vibration test: width 0.15 mm (10 to 58

Hz), 9.8 m/s2 (58 to 150 Hz), (2 hours each on the X, Y, Z axes)

 

Impact resistance

Equivalent to JIS C 0912: 98 m/s2 (3 each on the X, Y, Z axes)

 

 

Internal current consumption

400 mA

(5 VDC)

 

 

 

External supply power

12 VDC ±5%, 0.5 A (only needed for 10BASE5 systems)

 

 

Ethernet interface

AUI for 10BASE5 (D-sub 15-pin)

10BASE-T (RJ-45 connector)

 

 

 

Programmer interface

D-sub 25-pin

 

 

Weight

Approx. 380 g

 

 

Accessory

One cable, one instruction manual

 

 

*1: The JW-50FL cannot be installed on a W70H/100H.

[2]Communication specifications

(1)Communication section specifications

 

 

Item

Specifications

 

 

 

 

 

 

Network compatibility

10BASE5 or 10BASE-T

 

 

 

 

 

 

Transfer speed

10M bps

 

 

 

 

 

 

Physical topology

Bus (10BASE5) / Star (10BASE-T)

 

 

 

 

 

 

Transfer media

50 ohm yellow cable (10BASE5), twisted pair cable (10BASE-T)

 

 

 

 

 

 

Transfer system

Base band

 

 

 

 

 

 

Maximum transfer distance

10BASE5: 500 m/segment, 2.5 km/network *2

 

 

10BASE-T: 100 m/segment, 500 m/network *3

 

 

 

 

 

 

 

 

 

Protocol configuration

 

 

 

Application

FA link protocol

 

 

Transport

UDP

14

 

Network

IP

 

Data link

Ethernet V2

*2: Maximum transfer distance between stations when connecting more than one segment using re- peaters.

*3: Maximum transfer distance between stations when connecting more than one 10BASE-T segment using hubs.

14-4