Sharp JW-20FL5, JW-20FLT, JW-50FL, Z-336J manual 83

Chapter 9: Message transfers

(2) For the JW30H or J-board (Z-500 series)

			Allocation available data memory address
			for the transmission buffer
			Bit address(8)	Byte address(8)	File address(8)
		Relay	00000 to 15777	ｺ 0000 to ｺ 1577	000000 to 001577
		TMR/CNT contact point	T-C0000 to T-C0777	ｺ 1600 to ｺ 1777	001600 to 001777
		TMR/CNT/MD current value	---	b0000 to b1777	002000 to 003777
				09000 to 09777	004000 to 004777
				19000 to 19777	005000 to 005777
				29000 to 29777	006000 to 006777
				39000 to 39777	007000 to 007777
				49000 to 49777	010000 to 010777
		Register	---	59000 to 59777	011000 to 011777
	File 0
				69000 to 69777	012000 to 012777
				79000 to 79777	013000 to 013777
				89000 to 89777	014000 to 014777
				99000 to 99777	015000 to 015777
				E0000 to E5777	016000 to 023777
		Register	---	E6000 to E7777	024000 to 025777
		(Possible to register error history)
		TMR/CNT current value	---	b2000 to b3777	026000 to 027777
		Expansion relay	20000 to 75777	ｺ 2000 to ｺ 7577	030000 to 035577
9
		TMR/CNT contact point	T-C1000 to T-C1777	ｺ 7600 to ｺ 7777	035600 to 035777
		File 1	---	---	000000 to 037777
		File 2	---	---	000000 to 177777
		File 3	---	---	000000 to 177777
		File 10(H)	---	---	000000 to 177777
		to	to	to	to
		File 14(H)	---	---	000000 to 177777
		to	to	to	to
		File 2C(H)	---	---	000000 to 177777

-The relationship between the control module (on which the memory module is installed) and the file memory is as follows.

Control module	File memory
JW-31CUH1	File 0
JW-32CUH1 *	File 0, 1, and 2
	(File 2 can be allocated to 000000 to 177777 or 000000 to 077777)
JW-33CUH1	File 0, 1 to 3
JW-33CUH2	File 0, 1 to 3 and 10 to 14(H)
JW-33CUH3	File 0, 1 to 3 and 10 to 2C(H)

* File memory of J-board (Z-500 series) is the same as that of JW-32CUH1.

Note: Be careful not to allow the transmission buffer area to overlap with the common memory area.

9-6