Chapter 7: Computer Link Function

6Write network parameters

This is a function used to change the network parameter data of a receiving node through the network.

The following data can be changed.

-Node name (facility name)

-Address and size of common memory

When the address and size of the common memory is changed, the receiving node leaves the network and re-enters it again. If only the node name is changed, the receiving node will not leave the network.

Request message

Response message

Node number

Vender name

Manufacturer model name

7Node name (facility name) Top address of area 1

Size of area 1

Top address of area 2

Size of area 2

Token monitor time out time

Minimum allowable distance of frames

FL-net status

Protocol version

Upper layer status

Refresh cycle allowable interval RTC set value

Refresh cycle measured value (current value)

Refresh cycle measured value (maximum value)

Refresh cycle measured value (minimum value)

Network parameter

7-26