Chapter 6: Connection/Wiring
(2)Wiring the power source
When a 10BASE5 is used, 12 VDC power should be supplied to the transceiver.
Supply power to the 12 VDC power supply input terminal using a commercial constant voltage power supply unit.
Item | Specifications |
|
|
Supply voltage | 12 VDC |
|
|
Current capacity | 0.5 A minimum. |
|
|
LN TX RX 12V T PE HE
S7 S6 S5 S4 S3 S2 S1 S0
12 VDC power supply input terminal
Black wire
* Fuse (0.6 A)
Red wire (+)
(+) | Twisted pair wires |
|
12 VDC
(-)
* Use a fuse melt with time lag | Case | Green wire |
|
| (ground) |
FG
RESET
ON
S
H
I
E
L
D
OFF
6
Cable
(Accessory: Connector, cable length 1.5 m)
Remarks
-Use a power supply that is dedicated for use by the
-Do not reverse the positive and negative connections to the power terminals. Reversing the polarity may damage the