Sharp SL-5500 manual Pulling out the stylus

00 Cover.book Page 8 Saturday, January 19, 2002 11:33 AM

8Quick Start

•If a charging error occurs, the LED indicator will flash. Make sure that the AC power cord and the AC adapter are connected correctly, remove and reinsert the battery, then perform steps 1 to 3 above again. If the error persists, there is something wrong with the battery, SL-5500, etc. Contact your local SHARP dealer for repair.

•The AC power cord plug may differ in some countries.

The SL-5500 has a specified built-in rechargeable back-up battery that prevents the memory contents from being erased when you replace the battery.

The rechargeable back-up battery will be charged to its full capacity in 30 hours using the AC adapter or a fully charged “EA-BL06” operating battery. If you want to replace the operating battery before the rechargeable back-up battery is fully charged, be sure to connect the AC adapter. (Refer to page 70.)

Step 3: Pulling out the stylus

This unit comes equipped with a stylus to select items and enter various kinds of information, etc.

Pull out the stylus as shown. To replace it, insert it so that the protruding part of the stylus locks into place.

Touch the button displayed on the screen one time to open, select an item, etc.