14 Quick Start
Note: On this screen you cannot select or enter the category name.
Follow the next procedure.
Setting your passcode
By setting your own passcode in the SL-5500, you can protect your unit from
unauthorized use. Once you set the passcode and enable the setting, enter it every
time you turn the unit on.
To skip setting the passcode now, tap “Finish” or . You can enter it later using
the Security application. (See the separate Operation Manual.)
Caution: Use this function with care. If you forget your passcode, you need to
carry out the hardware reset. It will lose all data created and saved
and add-on programs added to the unit.
.
1.
Tap the “Set passcode” button.
2.
Enter your passcode and then tap “OK”.
3.
Enter the same passcode again and then tap “OK”.
To make the unit ask for the passcode at start-up every time you turn it on, tap
the “Require pass code at power-on” checkbox to turn it on.
4.
Tap “Finish” or to complete the initial settings.
The initial settings are complete and then the Home screen will be displayed.
• If you turned on the “Require pass code at power-on” option in step 3, the
passcode entry screen appears asking for your passcode. Entering the
correct passcode will display the Home screen.
00 Cover.book Page 14 Saturday, January 19, 2002 11:33 AM