Sharp manual Not sure what kind of device is to be used for the SL-5500

00 Cover.book Page 75 Saturday, January 19, 2002 11:33 AM

Troubleshooting 75

The alert message is displayed indicating that the back-up battery is exhausted.

The built-in rechargeable back-up battery is almost exhausted.

Connect the AC adapter to the SL-5500 for more than 30 hours or insert a fully charged battery (EA-BL06) into the SL-5500 for more than 30 hours. The back-up battery will be charged to its full capacity.

If the alert message still appears, contact your local SHARP dealer for repair.

Software reset can not be completed by switching the Battery replacement switch to the “REPLACE BATTERY” position and then back to the “NORMAL OPERATION” position.

Perform software reset with the SL-5500 turned on.

If you switch the Battery replacement switch to the “REPLACE BATTERY” position with the unit turned on, the display screen disappears gradually with display fluctuation.

This is not a malfunction. This unit is designed to protect the unit’s data.

The CF (or SD) card icon will not disappear from the taskbar by tapping the icon and then tapping “Eject card” (or “Eject SD-card”).

The operation (“Eject card” or “Eject SD-card”) is not valid if any files on a memory card are open, or if a modem card, etc. is in use.

Pressing the Home key to display the Home screen while adjusting settings in the Date/Time, Light & Power applications, etc. invalidates the settings.

Save the setting and close the application first by tapping or pressing , then display the Home screen. Pressing the Home key does not save it.

Not sure what kind of device is to be used for the SL-5500.

For information regarding the devices, etc., visit our Web site. (See page 79, “Product Support”)