Sharp SL-5500 manual Initial settings, Performing a Full Reset

00 Cover.book Page 10 Saturday, January 19, 2002 11:33 AM

10Quick Start

Step 5: Initial settings

Carry out the initial setup of the SL-5500 after completing the battery charge.

Performing a FULL RESET

You have to initialize the hardware prior to using the SL-5500.

Caution: When you push the FULL RESET button, the hardware will be reset. All data created and all add-on applications installed in the SL-5500 will be deleted.

1.Slide the battery replacement

switch on the rear side of the unit to the “REPLACE BATTERY” position.

NORMAL OPERATION

REPLACE BATTERY

2.Open the battery compartment lid.

3.Push the “FULL RESET” button on the lower right side of the battery compartment with the stylus.

Note: Do not use an object with a breakable or sharp tip.

FULL RESET button