Sharp manual Conditions of use, Caring for your SL-5500, Battery

00 Cover.book Page 71 Saturday, January 19, 2002 11:33 AM

Conditions of use 71

Conditions of use

Your SL-5500 conforms to international regulations insofar as it is used under normal conditions and in accordance with the following instructions.

Caring for your SL-5500

•Do not open or attempt to repair your SL-5500 yourself. The product may only be repaired by authorized service personnel.

•Do not drop your SL-5500 or subject it to severe impacts. Bending the body can damage the circuitry. Do not use extreme force when pressing the display or keys.

•Close the Display protection cover to protect the LCD from being scratched, broken, or damaged when you carry it with other objects.

•Do not insert business cards, pens, etc. between the Display protection cover and LCD. The LCD may be broken or damaged if the Display protection cover is pressed with force.

•Do not use sharp, pointed objects or your fingernails to touch the display screen. Before using your SL-5500, remove dirt and stain from the screen so as not to damage the screen.

•Do not use solvents to clean your SL-5500. Use only a soft, dry cloth.

•Do not carry your SL-5500 in your back pocket as it could break when you sit down. The display is made of glass and is particularly fragile.

Battery

•The SL-5500 consumes battery power even when turned off. Charge the battery once every week even when it is not in use.

•If the battery charging alert is displayed on the screen, charge the battery as soon as possible. If you continue using your SL-5500 ignoring the alert, the power will not be turned on and all data and settings will be lost.

•Before removing the battery from the SL-5500, make sure the SL-5500 is turned off.

•Change the battery as soon as it becomes old and weak. Using a weak battery may result in lost data or damage from battery leaks.

•Make sure that your battery is inserted in the SL-5500 at all times, otherwise all data and settings may be lost.

•Power supply may be blocked if there is dust on the battery terminals or the terminals of the main unit. Use a soft dry cloth to wipe the terminals. Batteries can cause damage, injury or burns if a conductive material touches the exposed terminals.