Sharp SL-5500 manual Appendix, What to do if a problem occurs, Software reset, Full reset

00 Cover.book Page 69 Saturday, January 19, 2002 11:33 AM

Appendix 69

Appendix

What to do if a problem occurs

Software reset

A strong impact, exposure to an electrical field, or other unusual conditions may render the SL-5500 inoperative. Pressing the keys may not have an effect. If this occurs, follow the instructions below.

1. With the SL-5500 turned on, set the battery replacement switch to the “REPLACE BATTERY” position and then back to “NORMAL OPERATION”.

NORMAL OPERATION

REPLACE BATTERY

2.Press (On/Off) to restart the SL-5500. The Home screen will be displayed.

Full reset

If the SL-5500 still fails to function after the software reset is done as instructed above, you will have to do a hardware reset.

Caution

Performing the hardware reset will erase all data created and all add-on applications installed in the SL-5500.

To perform the Full reset, refer to page 10, “Initial settings”.