Setting Up and Using OpenLCR

Changing your user profile

If you need to change your user profile, pick up the handset on the fax

machine, and then press OpenLCR followed by 3 . Follow the instructions you hear.

If the display shows the alternating messages SET OWN NUMBER / 10 DIGITS, press the number keys to enter your fax/phone number, including the area code (the number must be 10 digits long). When finished, press

START/MEMORY .

If you are on a pulse dial line, press before pressing the number keys to respond to the instructions. (This makes your fax temporarily issue tone signals when you press the number keys.)

What to do if “E” appears in the display

A highlighted “E” will appear in the display in place of “C” if the rate data in the fax is out-of-date and the fax is unable to obtain new data. When this happens, OpenLCR routing will not take place.

TEL FAX

JAN-19 02:16

TAD

“E” indicates that the rate data is out-of-date.

This will only occur if the fax machine is unable for some reason to make its periodic call to OpenLCR to receive new rate data.

First try downloading the rate data manually by pressing OpenLCR and 2 as

explained in Downloading (receiving) the rate data manually on page 26. If this doesn’t work, proceed to the following section, What to do if you cannot connect to OpenLCR.

What to do if you cannot connect to OpenLCR

If you are unable to connect to OpenLCR when you use the OpenLCR key to register or manually download data, it is likely that the phone number that the fax machine dials when you press the OpenLCR key is no longer correct.

2. Setting Up OpenLCR

29

Page 31
Image 31
Sharp UX-A255 operation manual Changing your user profile, What to do if E appears in the display