Sharp UX-A255 Remote Operations, Remote code number, Toll Saver, Date and time display

Remote Operations

Remote Operations

When you are out, you can call the machine from any touch-tone telephone and play back your messages using the remote commands. You can also use these commands to change the reception mode and other settings.

Remote code number

To access the machine to perform remote operations, you must first enter your remote code number. The remote code number has been set to "001" at the factory. If you wish to use a different number, follow these steps:

1	Press FUNCTION once and		once.	Display:
				T.A.D. SETTING
2	Press	once and	twice.	REMOTE CODE
3	Press	.
4	Press the number keys to enter a 3-digit remote code number.
5	Press START/MEMORY to store the remote number, and then STOP to return to
	the date and time display.

Toll Saver

When you call the machine to listen to your messages, it will answer after two rings if it has received at least one message, or after four rings if it has not received any messages.

This allows you to save money on telephone charges, particularly if you are calling long distance. If the machine does not answer after the second ring, you can simply hang up before it answers, saving yourself the cost of that call.

If you do not want to use the Toll Saver function, you can turn it off by following the steps below. In this case, the machine will answer after the number of rings set with the NUMBER OF RINGS setting (see Changing the number of rings on page 65).

Answering	Machine
3.

45