Sharp UX-A255 operation manual Press, Enter a 2-digit number 01 to

Setting Up and Using OpenLCR

♦When you change the SHORT TIME and/or LONG TIME setting, the fax machine will automatically call OpenLCR and receive rate data for the new times.

1	Press FUNCTION once and		once.	Display:
				LCR SETTING
2	Press	once and	once.	LCR TIME

3

4

Press	SHORT TIME
Enter a 2-digit number (“01” to “ 29”)	The display briefly shows
	your selection, then:

for the number of minutes of the

SHORT TIME setting. (If the number isLONG TIME less than 10, enter a 0 before the

number.)

5 Enter a 2-digit number for the number

of minutes of the LONG TIME setting. (The number must be greater than the SHORT TIME setting and no more than 30.)

•Note: If the display shows NO

The display briefly shows your selection. If the settings were changed, it will then show:

START: DOWNLOAD

SERVICE, you must first download the rate data.

6 Press START/MEMORY to begin receiving the rate data for the new settings.

•Your fax calls OpenLCR and receives the data. This lasts one or two minutes.

•Note: If you do not press START/MEMORY to receive new data, the settings will revert to their previous state.

32