Sharp UX-A255 operation manual Reception to Memory on

Messages and Signals

LCR DOWNLOADING	The fax machine has called OpenLCR and is
	receiving carrier rate data. This message only
	appears if you have registered with OpenLCR.
LINE ERROR	Transmission or reception was not successful. Press
	the STOP key to clear the message and then try
	again. If the error persists, see Line Error on page 87.
MEMORY IS FULL/	The memory is full. You may have too many
SEE MANUAL	messages recorded in the answering machine. To
(alternating messages)	erase messages, see page 37.
	This message may also occur during fax reception if
	too much data is received before the pages can be
	printed out. If faxes have been received to memory
	because printing is not possible (an additional
	message will indicate the problem), resolve the
	problem so that printing can continue (see Substitute
	Reception to Memory on page 70).
	If you are attempting to transmit from memory, see If
	the memory becomes full on page 64.
	If you are copying, see If MEMORY IS FULL appears
	on page 71.
MEMORY PRINTING	The fax is preparing to or printing out a document
	from memory.
NO DATA	This appears if you attempt to search for an auto-dial
	number when none have been stored.
NO SERVICE	This appears if you haven’t registered with OpenLCR
	and press the FUNCTION key and 7.
OFF HOOK	This appears if you forgot to replace the handset after
	using it to dial and send a fax. Replace the handset or
	press the STOP key to clear the message.
ON HOOK DIAL	The SPEAKER key has been pressed and the fax
	machine is waiting for you to dial.
OVER HEAT	The print head has overheated. Operation can be
	continued after it cools. If overheating frequently
	occurs, try changing the print contrast setting to
	LIGHT (see page 15).

92