Sharp UX-A255 Checking or erasing the transfer message, Turning the Transfer function on and off

Transfer Function

4 Press START/MEMORY and speak into the handset to record the message.

•The transfer message can be up to 15 seconds long. While recording, the display will show the time left to record.

5 When finished, replace the handset or press STOP .

Checking or erasing the transfer message

To check or erase the transfer message, follow Steps 1 and 2 of the above

procedure, and then press PLAY to check the message, or	to erase the
	DELETE
message.

Turning the Transfer function on and off

When you go out and wish to use the Transfer function, turn it on as follows:

1

2

3

Press FUNCTION once and		once.	Display:
			T.A.D. SETTING
Press	once and	3 times.	TRANSFER FUNC
Press	.		1=YES, 2=NO

4 Press	1	to turn on the Transfer
function.
(Press	2	to turn the function off.)

The display briefly shows your selection, then:

ON TAD FAILURE

5 Press STOP to return to the date and time display.

42