Sharp UX-B30 manual 102

all.book Page 102 Tuesday, June 1, 2004 4:24 PM

Messages and Signals

FAX RX IN MEMORY	A fax has been received in memory because the print
	cartridge needs replacement, you have run out of
	printing paper, or the paper is jammed. The fax will
	print out automatically when the problem is fixed.
FUNCTION MODE			has been pressed.
INK NEAR EMPTY	The cartridge is nearly empty (approximately one
	eighth of the ink remains).
LINE ERROR	Transmission or reception was not successful. Press
	STOP
		to clear the message and then try again. If the
	error persists, see Line error on page 97.
LOW INK	The cartridge is low on ink (approximately one
	quarter of the ink remains).
MEMORY IS FULL	If faxes have been received to memory because
	printing is not possible (an additional message will
	indicate the problem), resolve the problem so that
	printing can continue (see Substitute Reception to
	Memory on page 67).
	If you are attempting to transmit from memory, see If
	the memory becomes full on page 56.
	If you are copying, see If MEMORY IS FULL appears
	on page 69.
MEMORY PRINTING	The fax is preparing to or printing out a document
	from memory.
NO # STORED	This appears if you attempt to search for an auto-dial
	number when none have been stored.
OFF HOOK	This appears if you forgot to replace the handset after
	using it to dial and send a fax. Replace the handset or
			STOP
	press		to clear the message.
ON HOOK DIAL		has been pressed and the fax machine is waiting
	for you to dial.

102