all.book Page 14 Tuesday, June 1, 2004 4:24 PM

Loading Printing Paper

Loading Printing Paper

You can load up to 100 sheets of A4-size paper (60 - 80 g/m2) in the paper tray (at room temperature; maximum stack height should not be higher than the line on the tray).

1

2

Fan the paper, and then tap the edge

against a flat surface to even the stack. Make sure the stack edges are even.

Insert the stack of paper into the tray, PRINT SIDE UP.

If paper remains in the tray, take it out and combine it into a single stack with the new paper.

Be sure to load the paper so that printing takes place on the print side of the paper. Printing on the reverse side may result in poor print quality.

GENTLY LOAD PAPER INTO THE PAPER TRAY.

DO NOT FORCE IT DOWN INTO THE FEED SLOT.

The stack should not

be higher than this line

Note: Do not use paper that has already been printed on, or paper that is curled.

14

Page 18
Image 18
Sharp UX-B30 manual Loading Printing Paper