all.book Page 50 Tuesday, June 1, 2004 4:24 PM

Sending a Fax by Automatic Dialling

2 Enter the number of the receiving machine by pressing the number keys.

If a pause is required between any of the digits to access a special service

or an outside line, press . The pause will appear as a hyphen. Several pauses can be entered in a row.

If you are on a Flash-type PBX and are dialing out, press R , press to insert a pause, and then enter the number of the receiving machine.

If you are on a PBX and must dial a number to dial out, enter the number,

press to insert a pause, and then enter the number of the receiving machine.

3 Check the display. If the number of the receiving machine shown is

START/

SPEICHER

correct, press

.

If the number is not correct, press to backspace and clear one digit at a time, and then re-enter the correct digit(s).STOP

50

Page 54
Image 54
Sharp UX-B30 manual Correct, press