Sharp UX-B30 manual All.book Page 94 Tuesday, June 1, 2004 424 PM

Models: UX-B30

1 115
Download 115 pages 39.83 Kb
Page 98
Image 98

all.book Page 94 Tuesday, June 1, 2004 4:24 PM

Maintenance

5 Compare the diagonal line above the printed bars to the diagonal line below the printed bars.

Look for a break in the diagonal line above the bars. A break indicates clogged nozzles.

Breaks in the diagonal line at the top of the page indicate clogged nozzles.

Unbroken lines at the bottom of the page indicate the nozzles were cleaned.

6 If the bottom diagonal line still has breaks, repeat Steps 1 through 4 to run the nozzle test again. Run the test a third time if necessary.

If the print quality is satisfactory after running the nozzle test three times, the nozzles are clean.

If the print quality is still not satisfactory after running the test a third time, continue with Step 7.

7 Press PATRONE , open the operation panel, open the print compartment

cover, and remove and then reinstall the print cartridge (see the procedure beginning on page 17).

8 Repeat the nozzle test. If the lines are still broken, wipe the nozzles as explained in the following section.

94

Page 98
Image 98
Sharp UX-B30 manual All.book Page 94 Tuesday, June 1, 2004 424 PM