all.book Page 90 Tuesday, June 1, 2004 4:24 PM

Maintenance

4 Wipe the scanning glass (exposed by removing the white roller) and rollers with a clean cloth.

Make sure that all dirt and stains (such as correcting fluid) are removed. Dirt and stains will cause vertical lines on transmitted images and copies.

If the scanning glass is difficult to clean

If you find it difficult to remove dirt from the scanning glass, you can try moistening the swab with isopropyl alcohol or denatured alcohol. Take care that no alcohol gets on the rollers.

5 Replace the white roller, inserting the right end first.

When re-inserting the roller do not use excessive force to locate the right hand end. This may result in damage to the machine.

1

2

6 Push the green lever up and back. Make sure that the small knob on the lever goes into the hole on the side of the compartment.

90

Page 94
Image 94
Sharp UX-B30 manual Replace the white roller, inserting the right end first, If the scanning glass is difficult to clean